How To Replace A Smoke Detector

Do you have a smoke detector that beeps at you all the time, even with new batteries? It may be time to replace it. Most manufacturers recommend replacing smoke detectors if they’re 10 years or older because the sensors become unreliable. In this article, we’ll walk you through a step-by-step process to help you replace your smoke detector.

Turn Off the Power

cutting power off at the breaker

First, fully disconnect the power to the smoke detectors in your home at the breaker panel. Once you’ve flipped the breaker, return to one of the smoke detectors and use an electrical tester to make sure all of the wires are dead. If there’s still power to that wiring, your tester should light up or make a noise. Start this process over until your tester no longer lights up indicating there is still power.

Remove the Smoke Detector

Any hour Services plumber fixing a dripping faucet

The most common smoke detectors use a twist-and-lock method to hold the smoke detector on the mounting bracket. So, grab the detector firmly and twist it counterclockwise. You should feel it release from the bracket and it will be hanging by the wiring harness.

Connect the Wiring Harness from the Smoke Detector

Any hour Services plumber fixing a dripping faucet

Depending on the style of your smoke detector, the wiring harness may slip on and off, while others may have a tab you need to press to get it to release.

Remove the Old Baseplate

Any hour Services plumber fixing a dripping faucet

Next, you’ll remove the old baseplate. Sometimes these can be painted over when a homeowner paints walls or ceilings. If that’s the case, use a razor knife and score around the paint, this will help prevent any peeling.

The base plate is usually held on by 2 screws. Sometimes you can just loosen the screws and just twist the plate off, other times you will need to remove the screws all the way to get it off.

Connect Wiring Harness to the Wires

Any hour Services plumber fixing a dripping faucet

The new smoke detector wiring harness should have the same colors as the old smoke detector. You should have a black wire (which is the hot wire), a white (which is your neutral), and a red one (this is a communication wire for interconnected smoke detectors). It’s important to connect all of them correctly so they go off together and protect you no matter where you are and where the fire is.

Attach the New Base Plates

Any hour Services plumber fixing a dripping faucet

The next step is to install the new base plate. Your new base plate may have different hole configurations. But you might be able to slip it over the screws, turn it until it locks in place, and then tighten the screws down.

Install the New Smoke Detector

Any hour Services plumber fixing a dripping faucet

Next, you’re going to snap the wiring harness into the matching port at the back of the smoke detector. Direct the dangling wires back into the opening so they don’t get pinched between the detector and the base plate. Then twist the smoke detector into place.

Remove the Battery Spacer

Any hour Services plumber fixing a dripping faucet

Some smoke detectors have a plastic strip and others have a big red arrow made of cardboard that acts as a spacer. This keeps the battery from activating the smoke detector during the shipping and storage process. Go ahead and remove those now.

Turn the Power Back On and Test

Any hour Services plumber fixing a dripping faucet

The last step is to turn the power back on and test the smoke detectors by pressing the test/hush button for the number of seconds designated on the back of the detector. Then all interconnected, battery-backed-up alarms should respond.

So, that's how you replace a smoke detector. As you can see, with a little bit of information and instruction this is something you can do yourself. But, if you ever feel like you have gotten in over your head, call an electrician you trust for some help.



Other helpful resourses:

    🛠️ DIY videos from Any Hour Services
    🎙️  Listen to Our Podcast  - In the House
    
🎥 Watch our VLOG - Along For The Ride



Author: Nathanael Stuver
Copyright © 2022 by Any Hour Services

 

Apr 5th 2023

All Posts