If you have to jiggle the handle or your toilet randomly starts and stops running, a bad flapper is the first thing to check to get it to stop running. Before calling a plumber try replacing your flapper and see if that helps.
How To Replace Your Flapper
Your toilet flapper is in charge of flushing your toilet. It lifts when you push down the handle and lowers as the water drains. A bad one can’t seal right.Step 1: Shut the water off at the wall and flush the toiletStep 2: Disconnect the chain from the flush arm and remove the flapperStep 3: Take the old flapper to the store and buy a replacementStep 4: Clean the opening at the bottom of the toilet and install the new flapperStep 5: Attach the chain to the flush armStep 6: Turn the water back on and test
How To Replace Your Toilet Flapper
Click this link for a step-by-step video we made showing you how to replace a failed toilet flapper.
Replacing A Failed Fill Valve
If that doesn’t do the job, the next most common cause is a bad fill valve. Your fill valve is a tube that comes up inside the tank. It’s usually connected to the water supply hose from the wall.A really common give-away that the fill valve has gone bad is water spraying from the top. You might think that’s how it fills the tank when you flush, but it’s not actually normal.Like the flapper, a fill valve is something that you can replace yourself. Its pretty straightforward, if a bit more involved than replacing a flapper. Check out the video below for steps on how to replace yours.
How To Replace Your Toilet Fill Valve
Click this link for a step-by-step video we made showing you how to replace a failed toilet flapper.
JOIN OUR EMAIL LIST
Join our email list to get access to weekly emails with helpful videos, educational articles, and DIY home maintenance guides.
