Logo for Any Hour Electric, Plumbing, Heating & Air featuring a smiling technician with crossed arms, a stopwatch, and a bold, professional tone.
You are viewing the Arizona site
You are viewing the Utah site

How to Fix the Fill Valve on a Toilet

A running or leaking toilet can waste up to 73,000 gallons of water per year! And when it comes to how to fix a leaking, running toilet, the cause is usually a failing or malfunctioning flapper.

But often, the problem is a little bigger. Sometimes, a running toilet is caused by a bad fill valve that needs to be replaced. If you look inside the tank of your toilet and see that the fill valve is leaking or spraying water from either the top, or leaking water from the bottom of the tank, chances are good it needs to be replaced before it wastes you any more water or causes any damage to your home. Fortunately, it’s a relatively easy fix that can be done with minimal expense and a few basic tools and supplies.

Pick up a new fill valve at your local hardware store, making sure it’s the correct fit for your toilet. This will generally run you anywhere from $10-$20. You may also need a new supply line (the tubing that runs from beneath your tank to your water supply) if yours is a solid, inflexible line. Check this first and pick up a flexible supply line so you have one on hand to make this repair. Other supplies you will need include a small bucket, a sponge, a pair of pliers, a pencil, a screwdriver, a tape measure and possibly a utility knife. Let’s get started!
REMOVE LID AND MARK WATER LEVEL
Remove the lid from the toilet tank, then take a pencil and mark the level of the existing water line. This shows the water level of your tank so you can match it once you’ve replaced the part.
TURN OFF WATER
Next, turn off the water supply to your toilet. The shutoff valve is usually found behind and near the bottom of the toilet. Turn the water off by turning the valve to the right. Next, we are going to be underneath the toilet, and loosen the nut that's on the bottom of the fill valve.
DRAIN TANK AND REMOVE WATER
Next, flush the toilet to empty the water out of the tank. Hold the handle down so all of the water drains out of the tank. Remove any additional water from the tank by soaking it up with your sponge.
REMOVE WATER SUPPLY LINE
You may need adjustable pliers to loosen the bolts at the top and bottom of the supply line. Remove the water supply line nut and line.
REMOVE OLD FILL VALVE
Once the nut is off, remove the old fill valve by lifting it out the top of the toilet tank.
INSTALL NEW FILL VALVE
Next, you're going to prepare the fill valve for installation. You'll need the locknut and the shank washer that comes with the new fill valve and for some models, you’ll need to remove an inner piece of the washer with your utility knife. Slide this piece up over the bottom shank of the fill valve.

Place the new fill valve in the toilet, making sure not to tighten it down yet. Adjust the top of the fill valve to about 3 inches above the overflow pipe. If you have a standard tank, the fill valve will probably come preset to the right height. But if you have a shallow tank or a deep tank, you may need to adjust the height of the fill valve by loosening the lock ring and raising or lowering the fill valve.

Next, while applying downward pressure to the fill valve, take the locknut and screw it to the bottom of the fill valve, where it exits the bottom of the tank. Tighten it down so the rubber washer squishes out and forms a good seal. You don’t want water to leak out after you've installed the new fill valve--but you also want to be careful not to overtighten it. Overtightening can crack the fill valve or crack the tank and cause flooding.
ATTACH REFILL TUBE TO OVERFLOW PIPE
Attach the refill tube to the fill valve and attach one end of the refill tube to the refill clip. Place the clip on the side of the overflow tube. You don't need excess tubing, so measure how much you need and then cut any excess. Attach the other end of the tube to the nipple on the side of the fill valve; the tube should form a slight arc.
RECONNECT WATER SUPPLY LINE
Next, reattach the water supply line. Note: In this step, if you have looked under your toilet and found that you have a solid supply line instead of a flexible one, here's where you'll need that replacement supply line. You can save yourself the headache of trying to fit the solid line both now and anytime you may need to replace your fill valve in the future by simply replacing the line now. To remove it, loosen the nut at the bottom and it should come right off. Once it's removed, take your flexible line and tighten it down. Once you finger-tighten it at the bottom, attach it to the bottom of your fill valve. Take your pliers and maybe give it another quarter turn, being careful not to overtighten any connections.
TURN WATER BACK ON & CHECK FOR LEAKS
Turn the water back on and check all connections for leaks. If it’s working without any leaks, you’re good to go.
ADJUST WATER LEVEL IF NEEDED
Finally, check the water line and adjust the water level in the tank if it’s too low. You can check this by matching the water line to the mark you made with a pencil before you got started. If the water level needs to be adjusted, you'll find an adjustment screw on the fill valve. Flush the tank first and then make your adjustments while the water is refilling. Clockwise will make the water level go higher; counter-clockwise will make the water level go lower. Put the lid back on the tank and you're all done!
Join our email list to get access to weekly emails with helpful videos, educational articles, and DIY home maintenance guides.
Logo for Any Hour Electric, Plumbing, Heating & Air featuring a smiling technician with crossed arms, a stopwatch, and a bold, professional tone.

Any Hour Services

1374 West 130 South, Orem, UT 84058

© Copyright 2024 Any Hour Services LLC
© 2024 Any Hour Services LLC

Pricing FAQ

A:

Our pricing is fair and transparent. We use a fixed-price guide that reflects the time, materials, and real costs of running a dependable home services business. No hourly rates. No inflated prices based on where you live. We focus on what it takes to get the job done—not on how much we can charge.

Before we price your drains or excavation project, our expert technician will perform an in-home assessment to evaluate the tasks required. We only charge for what’s necessary—no fluff, no extra costs. This allows us to pinpoint areas where we can save you money without sacrificing quality.

Call Now

A:

A: We price the job—not the clock. Hourly rates can be unpredictable, leaving you unsure of the final cost until the job is done. We believe in upfront, fixed pricing based on the work itself—not guesswork. You won’t pay for delays or mistakes, and we hold ourselves accountable to ensure there are no surprises.

Call Now

A:

We prefer to price based on the job and not what other companies charge. Hourly rates can lead to unexpected costs for homeowners, making the final price unpredictable. By pricing the work itself, we make sure you’re only paying for what’s actually needed—keeping things fair and efficient.

Call Now

A:

Requesting a quote is simple. Contact Any Hour Services, and we will assess your needs, providing a transparent estimate for the repairs.

We also provide FREE estimates and second opinions for major plumbing and excavation projects like repiping, sewer or water line replacements, remodels, and outdoor drain installs. Our team will evaluate the job in person, explain your options, and give you clear, upfront pricing. No hourly rates. No surprises. Just honest answers and expert service.

Call Now

A:

Yes, you can request a quote online—our team at Any Hour Services responds promptly to every inquiry.

Call Now

A:

We offer a $29 Drain Clear for single, easy-access drains. A licensed plumber will inspect the issue, clear out buildup like grease or debris, and get things flowing again. It’s a simple, affordable way to fix slow drains and help protect your plumbing from bigger problems down the line.

Call Now

A:

Yes, we provide FREE estimates for sewer main line replacements. If you are looking to replace your sewer main line, one of our expert technicians will come to your home and inspect your sewer main line, before showing you your options. Call us if you have questions about replacing your sewer main line—we’re here to help!

Call Now

A:

You can pay for your service with cash, check, or any major credit card. We collect, in full, upon completion of the project. If you would like to make monthly payments, we have many financing options available through 3rd party finance companies (On Approved Credit). Your technician can talk to you about your options when they give you pricing options for the work you want done.

Call Now

A:

Our phone staff are not expert technicians, so they can’t quote prices that would be accurate to your project’s needs. A trained technician needs to see the job firsthand to give you a clear, upfront price. Quotes over the phone are a guess, and we prefer transparency over uncertainty.

Call Now

A:

Ballpark prices can be misleading. Until we see the job, we can’t quote your final estimate accurately. Other companies may give an estimate range, but that often leads to additional costs and surprises later. Instead, we focus on giving you a fair price once a trained technician can assess the job properly.

Call Now

A:

A: We have a small dispatch fee to send our technician to your home. They’ll arrive in a truck stocked with thousands of parts, ready to complete most jobs the same day. After a thorough evaluation, your technician will explain the issue, walk you through the recommended fix, and show you your options and final price. No hourly rates. No surprises. Just a clear, upfront price before any work begins.

Call Now

Pricing FAQ

A:

Our pricing is fair and transparent. We use a fixed-price guide that reflects the time, materials, and real costs of running a dependable home services business. No hourly rates. No inflated prices based on where you live. We focus on what it takes to get the job done—not on how much we can charge.

Before we price your plumbing job, our licensed plumber will perform an in-home assessment to evaluate the tasks required. We only charge for what’s necessary—no fluff, no extra costs. This allows us to pinpoint areas where we can save you money without sacrificing quality.

Call Now

A:

We price the job—not the clock. Hourly rates can be unpredictable, leaving you unsure of the final cost until the job is done. We believe in upfront, fixed pricing based on the work itself—not guesswork. You won’t pay for delays or mistakes, and we hold ourselves accountable to ensure there are no surprises.

Call Now

A:

We prefer to price based on the job and not what other companies charge. Hourly rates can lead to unexpected costs for homeowners, making the final price unpredictable. By pricing the work itself, we make sure you’re only paying for what’s actually needed—keeping things fair and efficient.

Call Now

A:

Water heater replacements vary. Often, older units require updates to meet safety standards. Common items missing from many water heaters are flexible gas lines, expansion tanks, earthquake straps, gas sediment trap, upgrade exhaust venting, etc.

For an accurate quote, one of our licensed plumbers will inspect your existing system and provide a FREE estimate.

Call Now

A:

Our phone staff are not licensed plumbers, so they can’t quote prices that would be accurate to your project’s needs. A trained plumber needs to see the job firsthand to give you a clear, upfront price. Quotes over the phone are a guess, and we prefer transparency over uncertainty.

Call Now

A:

Ballpark prices can be misleading. Until we see the job, we can’t quote your final estimate accurately. Other companies may give an estimate range, but that often leads to additional costs and surprises later. Instead, we focus on giving you a fair price once a licensed plumber can assess the job properly.

Call Now

A:

We have a small dispatch fee to send our plumber to your home. They’ll arrive in a truck stocked with thousands of parts, ready to complete most jobs the same day. After a thorough evaluation, your plumber will explain the issue, walk you through the recommended fix, and show you your options and final price. No hourly rates. No surprises. Just a clear, upfront price before any work begins.

Call Now

A:

Yes! We offer FREE in-home estimates for major projects like water heater installations, water softeners, and repiping—without any dispatch fee. Our licensed plumber will assess the job, explain your options, and provide a clear, fixed price. No surprises or hourly rates—just honest, reliable service. Schedule your FREE estimate today!

Call Now

A:

No, our plumbers don’t quote a price until they have seen your plumbing project. Once they quote a price, it doesn’t change, no matter how long it takes. At any time, if you want to add more tasks to your plumbing project, your plumber will let you know how much it would cost to perform the extra work.

Call Now

A:

You can pay for your plumbing service with cash, check, or any major credit card. We collect, in full, upon completion of the project. If you would like to make monthly payments, we do have many financing options available through 3rd party finance companies, OAC. Your plumber can talk to you about your options when they give you pricing options for the work you want completed.

Call Now

Let's text you
that offer!

Enjoy these money-saving offers from Any Hour Services!
consent*